Case Studies
Case Studies: Metal Fabrication, Stamping and Machining,
Problem-Solving for Manufacturers, Eliminate Costly Problems, Reduce
Costs, Lower Shipping Costs, Special / Emergency Orders
Hoosier Trim Products (HTP) has been helping manufacturers with their metal
fabrication issues for almost 30 years. In that time, we have encountered
numerous situations where we have been able to help our customers when unique
problems or situations have occurred, to either correct a problem with the
fabrication project, or to reduce costs and save the companies money.
Below are just a few examples of the types of situations we have helped improve:
Metal Fabrication Case Studies: Solving Problems
- A manufacturer of products for Recreational Vehicles wanted a new
part made from cold-rolled steel. Having observed
rust quickly forming on the old part while in storage awaiting
welding, and being aware of the final use for the part, HTP recommended replacing the cold-rolled steel with galvanneal steel, thereby eliminating
the potentially costly problem for the customer.
- A long-standing corporate client, a manufacturer of industrial
lighting fixtures, needed a small custom project done; they asked HTP to produce samples of 10 different parts in 2 sizes
each. After we delivered the finished products, a painter lost one of the parts. Although the tooling had already
been removed to produce the part, when contacted for an emergency replacement, our dedicated
staff was successfully able to craft and deliver the single piece within about 2
hours.
- A customer was having
their finished parts bulk packed. However, it was noticed by one of our
employees that the bulk packaging was scratching the finish of the parts. As a
service to our customer, and at our own expense,
special care was taken to
layer and wrap the parts
in the bulk container to reduce damage during shipping.
Metal Fabrication Case Studies: Reducing Costs / Saving
Money
- A long-term customer was receiving bulk packed parts from HTP
on a weekly basis, and was discarding the packaging after each delivery. HTP recommended
that they keep and recycle the bulk packaging back to us. Since their own trucks
picked up the products, it was easy to set up a system to return the empty boxes
when a pick-up was made. This resulted in an annual savings to the company of
approx. $10,000 a year.
- HTP was able to reduce the size of the shipping packaging for another customer and was able to
significantly lower shipping costs.
- Hoosier Trim Products (HTP) worked for 2 years to direct a
change to
a paint system to increase product durability and reliability resulting in a cost reduction for the customer.
- A customer was purchasing an extra piece to complete a part, and was paying
too high a cost to
have it produced by CNC machining. HTP designed a hard tool to produce the piece
and greatly reduced the cost.
Check back soon for more details and new case studies.
 | Custom Quotes |
If you would like a custom quote for your project, please contact us by:
Phone: (317) 271-4007 or
Email:
hoosiertrim@yahoo.com
(A representative from
Hoosier Trim Products will contact you soon.)
Top of Page
|
 |
